Ring Hammer Crusher

         Ring Hammer Crusher for crushing all kinds of hard and weak abrasive materials. The compressive strength of its material does not exceed 100MPa, the moisture content of less than 15%. Broken materials are coal, salt, chalk, plaster, brick, limestone and etc. In addition, the hammer crusher not only can be used for crushing production line, sand making production line, but also in the mineral processing production line instead of a cone crusher.

Ring Hammer Crusher Advantages

1. Energy saving, Low noise, Little dust

2. Large crushing ratio, High production efficiency

3. The space between grid sections can be adjusted to change discharging granularity in line with clients’ needs.

4. The alloy hammerhead has excellent corrosion resistance and its service life is 1.5~2 times that of normal high manganese steel.

Ring Hammer Crusher Working Principle

     This series of machine is a punching rotor type crushing machine with ring-hammer on the rotor. First the material fed to the crushing space is crushed by punching force of the ring-hammer rotating at high speed. Mean while the material crushed gets kinetic energy from the ring-hammer and is punched forward the crushing board, and then it gets punched the second time and fall to the sieve plate. The material is cut, squeezed and crushed into pieces by the force of ring-hammer and their own rubbing and get out of the machine will be sent to the metal collector and get cleared off periodically.

Technical parameter of Yonghua Ring Hammer Crusher